Sponsored by Oregon Business

Data dig: Is Oregon manufacturing really in decline?

| Print |  Email
Articles - April 2012
Thursday, March 22, 2012
Click on any graph to view larger.


In light of these obstacles, how can Oregon maintain its upward trajectory? Paradoxically, job-killing automation may reduce the need for off-shoring, says Beleiciks. “As labor becomes a smaller portion of the output then it makes for less of a need to go after cheaper labor by off-shoring. There has been a lot of talk recently about on-shoring.”

Two case studies spotlight this phenomenon — as well as a growing emphasis on workforce training to keep local manufacturers competitive. In 2010, Portland-based KEEN Footwear opened a footwear factory in the Rose City. CEO James Curleigh — who has been in Oregon’s spotlight after meeting with President Obama in January –— cites three reasons: First, duty and transportation rates; labor and material costs in Asia have escalated, so “the economics of building in America start to make a lot more sense.” Second, digital-age “supply chain acceleration” has prompted the company to want tighter control over capacity, sourcing and quality standards. And third, KEEN used the factory to launch the higher-priced Utility line of steel-toed boots for American workers, which incorporated innovations they wanted to protect. Initially, the factory employed about 15 workers, but since then, as Utility became KEEN’s fastest growing brand, employment has doubled and Curleigh expects to hire more.

Earth2o, bottler of natural spring water in Culver, is another growing Oregon manufacturer. Last summer, demand was so strong for its product that it had to pull back from sales in Japan and reinvest to expand capacity, says CEO Steve Emery. And now it’s opened sales in China. Emery has seen “an expansion of marketplace” for Oregon products. “My friends in the beverage or the food industries all have been expanding their geography whether it’s outside the region or outside the country.”

One way Earth2o made its product stand out was by training its workforce in the highest level of NSF Safe Quality Food certification. Earth2o isn’t alone in using workforce training to raise its profile. Agnes Balassa, a workforce policy adviser to the governor, points to groups of small manufacturers that have banded together in consortia in recent years for high-performance trainings such as lean manufacturing, which not only reduces waste and spurs efficiency, she says, but also trains “a workforce to be more focused on problem-solving, quality management, being actively engaged with the work.”

“One of the challenges for our entire education system,” says Balassa, “is this dialog that says ‘manufacturing is dying.’”  So students don’t tend to select into these programs … which will make it hard to sustain them.”

Why is it important to maintain skilled labor for manufacturers? These made-in-Oregon and exported out-of-state products bring “new money as opposed to circulating existing money,” says Balassa.  State economist Beleiciks agrees, adding, “even if they’re not exporting, if they’re off-setting imports, it will have a similar effect.”

So aside from creating jobs, in-state manufacturing boosts tax revenues, provides income to Oregon stakeholders and induces development of necessary infrastructure.

Bringing actual manufacturing jobs back to Oregon will be an uphill battle. KEEN and Earth2o are only two examples of Oregon companies at the leading edge that may bring domestic manufacturing back from the brink.

Brandon Sawyer is research editor for Oregon Business. He can be reached at brandons@oregonbusiness.com.

CORRECTION: This story was corrected on April 30, 2012, to change "outsouring mania" to "off-shoring mania" in the first paragraph. THE EDITORS.



Mel White
0 #1 VP of Marketing and Business DevelopmentMel White 2012-04-16 11:53:06
I couldn't agree more. I co-manage a trade show design/manufact uring company in Portland, Classic Exhibits, with distribution throughout North America. Yes, it's tough being a manufacturer in the USA, but not impossible. You find niches that importers ignore or can't respond to fast enough, you source raw materials domestically and internationally , you look for strong partners, and you nurture a "can-do" culture. Mostly, you treat your customers as "customers" and not adversaries. No one is getting rich, but keeping folks employed has its spiritual rewards.
Quote | Report to administrator
Scott R Schroeder
0 #2 Offshoring vs OutsourcingScott R Schroeder 2012-04-16 14:17:38
@Brandon, your leading paragraph uses the term "OUTSOURCING". If you were only refering to the migration of jobs outside of the States, your use of that term creates confusion. The more accurate term is "OFFSHORING". "OUTSOURCING" can be both onshore and/or offshore.

Good article otherwise.

I own a Contract Manufacturing company in Corvallis,Orego n that relys on outsourcing. So I am biased and sensitive to the all too often confusion caused by the misuse of these terms.
Quote | Report to administrator
Brandon Sawyer
+1 #3 UPDATEBrandon Sawyer 2012-04-30 21:31:48
The word “out-sourcing” has been replaced by the more accurate term, “off-shoring,” in the opening paragraph of this article.
Quote | Report to administrator

More Articles

The List: 100 Best Nonprofits to Work For in Oregon

October 2015
Wednesday, September 30, 2015

Oregon Business magazine’s seventh annual 100 Best Nonprofits to Work For project attracted more than 150 nonprofits from around the state from a variety of sectors, including social services and environmental advocacy.  More than 5,000 employees and volunteers filled out the survey, rating their satisfaction with work environment, mission and goals, career development and learning, benefits and compensation, and management and communications.


5 marijuana business people share strategy ahead of recreational sales rollout

The Latest
Thursday, September 17, 2015

Ahead of the recreational rollout, what are dispensary owners most concerned about ?


Counterpoint: CLT not as green as people think

Contributed Blogs
Wednesday, September 16, 2015
photo-flickr-glasseyes viewthymbBY GREGG LEWIS | OP-ED

The issue of green-washing remains a significant challenge to those of us who would like to see the building sector in this country do more than make unverifiable claims of sustainability. Transparency about the impacts of a given material is the only way to allow designers to make intelligent choices when selecting building products.


More Than Meets the Eye

Guest Blog
Tuesday, September 22, 2015
Janet Yellen official Federal Reserve portrait-thumbBY JASON NORRIS | CFA

On September 17, the much anticipated Fed decision was delivered and the equity markets haven't liked it.


Mayoral musings

Linda Baker
Tuesday, September 15, 2015
091515-mayors-thumbBY LINDA BAKER

The 2016 presidential election is shaping up to be the year of the outsider, with Bernie Sanders and Donald Trump capturing leads in the polls and the headlines. In Portland, Wheeler vs. Hales is bucking the outlier trend.


Reader Input: School Choice

September 2015
Thursday, August 20, 2015

Which of the following would be most effective in reducing the cost of operating a public university in Oregon?


Social media transforming sports business

The Latest
Thursday, September 24, 2015

The traditional model of sports teams using paid media to get their message across is disappearing as teams look instead to social media to interact with fans.

Oregon Business magazinetitle-sponsored-links-02